Swordfish Pro 220amp 2-6s ESC

Swordfish Pro 220amp 2-6s ESC

$135.00 AUD

 Sold Out 

Category: Swordfish ESCs

RCBB is Australia's original and largest HIFEI dealer agency. Where the website shows stock availability orders will be dispatched within 24hrs - We do not take your payment and then order from overseas resulting in 4 week plus delivery times, as happens when buying from backyard operators in it for a 'quick buck'

We recommend protecting your esc from water damage with Corrosion X or sealing it with Kaufter electrical safe sealant.
As with any 6s max esc it is advisable to install a 35v cap bank for applications higher than 4s

Hifei Swordfish Pro 220 amp water cooled esc. This is a high quality ESC designed specifically for racing boat. Programing can be done with your transmitter, optional program card or optional USB adapter (Requires Windows xp or newer PC) or optional LCD Program Box/Handheld Unit.

220 Amps, 2s to 6s LiPo Cells.

-Microprocessor Controlled
-Aluminium PCB Technology
-The Most Advanced Automotive Level High Power MOSFETs
-Integrated the double water cooler, Anti splash water
-High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
-Programmable low voltage cut off
-Programmable cut off types(soft cut off/hard cut off)
-Time advance programmable (auto/low/middle/high,0~30 degree optional)
-Programmable start up type(very soft start/soft start/fast start)
-Thermal Protection(100 centigrade)
-Runs motor in forward or reverse by swapping any two motor wire connections.
-Safe 'power on' arming program ensures motor will not accidentally turn on.
-Auto shut down when signal is lost or radio interference becomes severe for more than 0.1 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
-The ESC is disabled when the voltage is over 26v at power-on

Input Voltage: 2S-6S Lipo Cells
Continuous Current(Surge): 220A (250A)
BEC: Switching BEC, Max 4A
Programmability: Transmitter, HiFei Program Box, HiFei USB Linker, HiFei Prog Card
Data Logger: No
Program Setting Software: HiFei Software 4.0X
Dimension: 104x41x22mm (not including wires)
Weight: 164g

NOTE: USB programmer requires Windows XP, Vista or 7(will not work with windows 8).

  • Manufactured by: Swordfish

This product was added to our catalog on Monday 18 March, 2013.

Your IP Address is: