Zonda




Product Image Item Name- Price
115mm Cat/Hydro dual pickup rudder 502B30-1

115mm Cat/Hydro dual pickup rudder 502B30-1

Ideal Zonda upgrade or universal fit for cats in the 30-42" range 4 pickups/2 outlets Dual steering horn for push/pull operation if desired 115mm...
$45.00 AUD

Add:

115mm Cat/Hydro dual pickup rudder BLUE 502B30-1-B

115mm Cat/Hydro dual pickup rudder BLUE 502B30-1-B

Ideal Zonda upgrade or universal fit for cats in the 30-42" range 4 pickups/2 outlets Dual steering horn for push/pull operation if desired 115mm...
$47.00 AUD

Add:

115mm Cat/Hydro dual pickup rudder RED 502B30-1-R

115mm Cat/Hydro dual pickup rudder RED 502B30-1-R

Ideal Zonda upgrade or universal fit for cats in the 30-42" range 4 pickups/2 outlets Dual steering horn for push/pull operation if desired 115mm...
$47.00 AUD

Add:

115mm Rudder for medium size cats 502B30

115mm Rudder for medium size cats 502B30

As fitted to Zonda, genesis, enzo, apparition 115mm deep, 60mm offset to blade edge Short standoff, single pickup ideal for cat, hydro
$25.00 AUD

Add:

3/16" flex cable 1 piece Reverse UPGRADE 510B50-R

3/16" flex cable 1 piece Reverse UPGRADE 510B50-R

3/16" flex with pre soldered stub shaft REVERSE ROTATION Saves time by allowing you to remove without taking the strut or stinger arm out. Use with...
$40.00 AUD

Add:

3/16" flex cable 1 piece UPGRADE 510B50

3/16" flex cable 1 piece UPGRADE 510B50

3/16" flex with pre soldered stub shaft Saves time by allowing you to remove without taking the strut or stinger arm out. Use with 3/16 shaft saver...
$35.00 AUD

Add:

3/16" flex cable 260mm 510B40-RZ

3/16" flex cable 260mm 510B40-RZ

Reverse rotation flex cable with 1 end squared Cut to length to suit Zonda 300mm long
$15.00 AUD

Add:

3/16" flex cable 260mm 510B40-Z

3/16" flex cable 260mm 510B40-Z

Flex cable with 1 end squared Cut to length to suit Zonda 300mm long
$15.00 AUD

... more info
 Sold Out 

36mm/40mm TFL motor mount 523B25

36mm/40mm TFL motor mount 523B25

Stand up mount with 25mm hole spacings Suits any 36/40mm motors As fitted to Zondas
$15.00 AUD

Add:

Exhaust pipes (fake) 4 pcs 537B30

Exhaust pipes (fake) 4 pcs 537B30

4x dummy exhaust outlets as used on our Zonda offshore cats. Bolts from inside the boat so you only drill the bolt size
$4.00 AUD

Add:





Your IP Address is: 54.83.122.227